5.1.3 System Control—Program Update—Plug and Update
5.1.3 System Control—Program Update—Plug and Update
The Plug and Update feature allows IP-PTs to be automatically updated to the latest software version when
they are registered to the PBX. When Plug and Update is enabled, the version number of the system software
stored on the Master unit is compared to the system software currently in the IP-PT, after the IP-PT has been
registered to the PBX. If the software on the Master unit is newer, it is downloaded to the IP-PT. Plug and
Update can be enabled for each site in a One-look network using the following procedure:
The Plug and Update screen lists the PBXs in the One-look network by site number and site name. By default,
Plug and Update is set to Off for all sites.
1.
In Plug & Update, select On for each to enable this feature.
2.
Click OK.
82
PC Programming Manual