Panasonic KX-NS1000 Pc Programming Manual page 350

9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Feature Guide References
2.5.4.5 Reverse Circuit
Caller ID Detection
Enables the PBX to detect a Caller ID signal from the analogue trunk.
Value Range
Disable, Enable
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
PC Programming Manual References
9.24 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Feature Guide References
2.19.1 Caller ID
Paytone Detection
Enables the PBX to receive a pay tone signal from the telephone company.
Note
This feature is available for extensions connected to legacy gateway PBXs only.
Value Range
Disable, Enable
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
Feature Guide References
2.22.3 Call Charge Services
Pause Time
Specifies the length of a pause.
Value Range
1.5 s, 2.5 s, 3.5 s, 4.5 s
Maintenance Console Location
9.25 PBX Configuration—[1-1] Configuration—Slot—Port Property - LCO Port
350 PC Programming Manual