Panasonic KX-NS1000 Pc Programming Manual page 901

Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Guide References
3.2.1.24 Intercom Paging
Fax Management
You can programme the system to automatically detect incoming fax calls and forward those calls to a fax
extension. You can specify a maximum of 2 fax extensions as the destination for faxes; if the main fax extension
is not available to receive a fax, the system will forward the fax call to the alternate fax extension.
Automatic Transfer of Incoming Fax Call
Specifies the detection and destination of incoming fax calls.
Note
The system can detect incoming fax signals during the first 30 seconds after it answers incoming calls.
Value Range
Disable, Transfer to Fax Extension, Receive Fax
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Guide References
3.1.3 Fax Server
Automatic Transfer of Incoming Fax Call—Mailbox Number
Specifies the mailbox to receive the fax if "Receive Fax" is selected for
Fax Call.
Value Range
2–[the value set in
Maintenance Console Location
24.4 UM Configuration—[5-4] System Parameters—Parameters
Feature Guide References
3.1.3 Fax Server
Main Fax Extension No. (1-8 digits)
Specifies the extension number of the main fax machine.
Mailbox No. Max. Length (3-8)] digits
24.4 UM Configuration—[5-4] System Parameters—Parameters
Automatic Transfer of Incoming
PC Programming Manual 901