Pbx Configuration-[1-3] Configuration-Option - Panasonic KX-NS1000 Pc Programming Manual

9.32 PBX Configuration—[1-3]
Configuration—Option
System options can be programmed.
System Wireless—System ID
Indicates the radio system ID used to register a PS (reference only).
To clear the System ID
1.
Click the Clear Master CS button.
2.
A warning will be displayed. Confirm the contents of the warning, and then click Yes.
Note
The System ID can be cleared using this procedure only in Off-line mode.
Value Range
Not applicable.
Maintenance Console Location
9.32 PBX Configuration—[1-3] Configuration—Option
New Card Installation—Card Status for any Card
Selects the initial status of cards after installation.
Value Range
In Service, Out of Service
Maintenance Console Location
9.32 PBX Configuration—[1-3] Configuration—Option
New Card Installation—Automatic Extension Number Set for Extension Card
Selects whether extension numbers are assigned to extension ports automatically or manually.
Value Range
Disable, Enable
Maintenance Console Location
9.32 PBX Configuration—[1-3] Configuration—Option
New Card Installation—ISDN Standard Mode for PRI23 Card
Specifies whether a PRI23 card is automatically set to ISDN Standard Mode or T1-LCOT mode when it is
installed for the first time.
9.32 PBX Configuration—[1-3] Configuration—Option
PC Programming Manual 395