S9-Show List; Automated Luminaire Effects - Philips 250ML Operation Manual

250ML Lighting Control Consoles

S9-Show List

This will display all focuses that have been stored of the type selected.
This example shows the 2 focus positions that have been stored. The first one without a name, the second one has
been labeled "Chair".
• Encoder D – Up/Down will allow the user to select any focus by rotating the encoder. (S6-Focus List) shall take
the user back to the list of focus types.
• (S7-Delete All) allows the user to delete all stored focus points. A warning screen shall allow the user to select (S9-
Yes) or (S10-No).
WARNING! Once executed, this command cannot be reversed.
• (S8-Delete Focus) allows the user to delete the highlighted focus point. A warning screen shall allow the user to
select (S9-Yes) or (S10-No).
WARNING! Once executed, this command cannot be reversed.
• (S9-Preview) allows the user to preview the highlighted focus point. The VGA monitor will display the stored
focus information to be viewed.
• (S10-Name) allows the user to label the focus point.

21. Automated Luminaire Effects

Effects allow constant movement of light in either a step based environment or in an effect engine based environment.
The 250ML Control Console gives you the ability to do step based affects for intensity and engine based effects for
automated luminaires.
The moving light effects engine can be applied to the movement parameters of any patched moving light.
This will give you the ability to select from available prebuilt effects, change the size on both axis, speed
and direction.
The effect engine shall be accessed by the Effect button once the fixtures have been selected.
Figure 72: Preview Position Focus Screen
Operation Guide
Automated Luminaire Effects
48