Recording A Submaster; Submaster Pages - Philips 250ML Operation Manual

250ML Lighting Control Consoles
Operation Guide
Note: The destination cue number must be available before the move procedure can be accomplished.
Figure 40: Move Command - Move Cue

9. Recording a Submaster

Once the channels levels are at the desired levels, the first step is to place the desk into Record Mode. See "Channels
and Channel Levels" on page 23 for more information.
Record Mode Indication
Figure 41: Recording a Submaster - Record Mode
Note: In Record Mode, many commands are limited to recording actions.

Submaster Pages

In order to record levels to a submaster on a particular page, when the [RECORD] button is pressed, look for the page
indication on the two number LCD display. By default it will say 01. If another submaster page is desired, use the
Arrow Up and Arrow Down keys (as shown in Figure 42) to change pages and then complete the normal recording
procedure.
LCD Screen Arrow Up Arrow Down
Figure 42: Submaster Pages - LCD and Arrow Buttons
30
Recording a Submaster