Operation; Console Vga Monitor Display Attributes - Philips 250ML Operation Manual

250ML Lighting Control Consoles

OPERATION

Once the 250ML control console is properly connected to power and DMX512 control network, the user can
immediately begin programming as the console will be initially setup for 250 conventional dimmer channels with a
default patch of 1 to 1. If this matches your installation then begin programming as outlined in this guide. If it does
not match your installation then proceed to this manual's section on Patch to get the console setup correctly to match
your installation.

1. Console VGA Monitor Display Attributes

When a VGA monitor (sold separately) is connected to the console, Figure 26 represents the console's output when
the console is powered up for the first time with a default showfile.
Note: A VGA monitor, while not required, is highly recommended for console operation.
A
D
E
F
A. Shows current Software Version in console.
B. Current Playback Master Level.
C. Current Grand Master Level.
D. Displays channel numbers and their current intensities.
E. Displays fixture numbers, their intensities and attribute data.
F. Displays Submaster data for the selected Submaster page.
G. Displays Cue Data
Figure 26: Console VGA Monitor Display Attributes
B C
G
Console VGA Monitor Display Attributes
Operation Guide
22