Console 7-Inch Display Attributes; Channels And Channel Levels; Assigning Channel Levels - Philips 250ML Operation Manual

Operation Guide

2. Console 7-Inch Display Attributes

Figure 27 depicts the console's 7-inch display and its attributes.
Note: The softkeys are empty and the Command Line indicates that the console is ready to accept commands.

3. Channels and Channel Levels

Channels are the control handle that control dimmers for intensity control. Channels are the items that are stored in
cues, submasters, playbacks and effects.
Channel Levels is the channel's intensity represented in percentages from 0% to 100% otherwise known as Full.

Assigning Channel Levels

The following commands can be accepted to give the conventional channel's intensity.
[CHANNEL] [ON]
The simplest example is [1] [ON]. This will put channel 1 at 100%. However, the user is not limited to applying an
intensity level to a single channel at a time. The user can apply any combination of numbers, the THRU, + and - keys.
Examples: 1 THRU 5 ON, 1 + 3 + 5 ON, 1 THRU 5 - 3 ON.
[CHANNEL] [@] [LEVEL] [ENTER]
Any selection of channels can be assigned any level in a percentage value from 0% to 100 %.
Example: 1 @ 50 ENTER, 1 @ 5 ENTER (the single digit is assumed), 1 @ 45 ENTER.
The user can also assign a channel's level using DMX values. [1] [@] [.] [127] [ENTER]. This shall place channel 1's
intensity at 50%.
This shows channels that have been given levels as represented on the monitor as shown in Figure 28.
2 3
OPERATION
B
D
E
A. Hard Item keys
B. Softkeys and Labels
C. Main Screen Area
D. Command Line
E. Encoders and Labels
Figure 27: 7-Inch Console Display Attributes
250ML Lighting Control Consoles
A
C B