Record (Minus Subs) Cue; Running A Cue; Pausing A Cue; Playback Operation - Philips 250ML Operation Manual

Operation Guide
• Encoder D: allows the adjustment of fade down time. Adjusting the encoder clockwise will add time in seconds.
Adjusting the encoder counterclockwise will reduce time in seconds. Holding the shift key while rotating shall
adjust in 1/10th of a second.
• When all settings are correct, press ENTER to complete the record cue action.
• Once the cue is recorded, the channel's levels will still be active in red. Press acre to release and now the cue shall
be able to function correctly.

Record (Minus Subs) Cue

Record (Minus Subs) allows the ability to record a cue ignoring all values that are outputting from active submasters.
All options and rules about recording still apply with the exception of excluding active submaster levels.
This can be very useful if looks are recorded onto submasters that are currently outputting but you don't want that
information to be captured in the new items that is being stored. (House lights and work lights are a great example).
Record (Minus Subs) can be activated by holding down the SHIFT key while pressing Record. This shall be referred
to as SHIFT + RECORD.
From here press [CUE] [#] [ENTER] to complete the record process.

5. Running a Cue

In order to playback a cue, use the following command.
[CUE] [#] [LOAD] [GO] or [CUE] [#] [GO]
The Cue key is on the main command panel, the number is the number of the cue that you want to load. Load and GO
are below the crossfade sliders.
The continued pressing of the GO key will automatically trigger the next sequentially numbered cue in the cue list.
Once you are at the end of the cue list, the GO button has nothing other to trigger. However, you can load the
sequence again by [CUE] [#] [LOAD] to start at any point in the sequence.
[CUE] [0] [LOAD] [GO] or [CUE] [0] [GO] shall release the current cue list and all levels from the cue will go out.

6. # Pausing A Cue

A running cue can be paused or frozen at any point by typing [SHIFT] + [GO]. Pressing Go will resume the running
of the cue from the point at which it was paused.
A running cue will display in a red background while a paused cue will display in a purple background.

7. Playback Operation

Cues can also be played back using the playback faders instead of the Load and Go buttons.
Once the cues have been stored, cycle the A/B faders (shown to the right) to zero. The playback faders
will be loaded when the first cues background color changes to cyan.
Once the first cue has been loaded onto the faders, take both faders to full. The cue will transition from
beginning to end corresponding to the movement of the faders from bottom to top. While the cue is
fading, the cue's background color will be pink. When the cue is finished fading and outputting, the
2 7
OPERATION
Figure 34: Record Minus Subs Screen
250ML Lighting Control Consoles