Hitachi IJ UX Service Manual page 61

[Procedure to upgrade function using upgrade key for UX-D]
1 Turn off the power and install the upgrade-keys on EZJ126 board.
2 Turn on the power.
3 Press Upgrade function setup at the second page of the service maintenance
work screen.
If Prev. menu Next menu is not displayed on the maintenance menu, set the Upgrade
password "UGRS" on the login user selection screen.
For information on changing to the Upgrade mode with Upgrade password
"UGRS", refer to "2.1 Setting of service personnel maintenance mode."
Upgrade screen is displayed.
Upgrade function setup
Particle use 1 line
2 line
3 line
4 line
5,6 line
Max registers
Max printing columns
Calendar items
Shift code, Time count
Replacement items
Count items
Number of upgrades available : ４
Number of upgrades used
4 Select the items to upgrade then press OK.
Upgrade function setup
Particle use 1 line
2 line
3 line
4 line
5,6 line
Max registers
Max printing columns
Calendar items
Shift code, Time count
Replacement items
Count items
Number of upgrades available : ４
Number of upgrades used
5 Exit the maintenance screen then cancel the Upgrade password by using
password protection.
[Stop ]
f/2 f/1
f/2 f/1.286
f/2 f/1.47
f/3
f/1.786
f/3 f/3
300 300-2000
240 1000
3 8
NOT supported supported
48 99
3 8
Upgrade code
: ０
ＱＳ２０２
[Stop ]
f/2
f/1
f/2 f/1.286
f/2 f/1.47
f/3 f/1.786
f/3 f/3
300 300-2000
240
1000
3 8
NOT supported supported
48 99
3
8
Upgrade code
: ４
ＨＲ２０８
2-41
Warning Com=0 2015.07.07 12:45
HOME
f/1
f/1
f/1
f/1
f/3
Cancel
OK
Warning Com=0 2015.07.07 12:45
HOME
f/1
f/1
f/1
f/1
f/3
Cancel
OK