Issue 9.0
7 - 36
10.3.3
ADA-L UNIT Connection
10.3.3.1
ADA-L UNIT Connection for Recording Only
1.
2.
The mini-plug connection cord should not use an
attenuator and have a monaural (single ring)
mini-plug connection for normal recording.
Set the ADA-L UNIT DSW switches (Refer to
7-27 ADA-L UNIT on page
When ADA connection for
recording only, DSW 1 should be
set to "OFF". For lot number
X X X X
the backside label of the DT300
series telephones, hands-free
microphone voice is output.
Set DSW 6 to ON.
DSW switch 5 is used to change
output level from the OUT jack
of the ADA-L UNIT
(On = Low, Off = High).
When recording calls to a PC,
ground the PC for noise
suppression.
Figure 7-27 ADA-L UNIT
Using the mini-plug connection cord, connect the
the ADA-L UNIT Out jack to the cassette recorder
MIC jack (Refer to
Connection on page
Installing SV8100 Optional Equipment
UNIVERGE SV8100
7-36).
M
and higher indicated on
X
Figure 7-28 ADA-L OUT Jack
7-37).
Figure
the