Figure 3-50 Install Chs2U Joint Bracket Kit - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
3 - 42
6. Secure the chassis to the CHS BASE UNIT using eight screws
supplied with the CHS2U JOINT BRACKET KIT.

Figure 3-50 Install CHS2U JOINT BRACKET KIT

7. Connect the ground wire to all chassis. Refer to
Grounding on 19" Chassis on page 3-14
grounding the system.
8. Refer to 2.3.5 Install AC Power Cords on 19" Chassis on page
3-15 to continue installation of the chassis or, Chapter 4
paragraph 2.1 Installation and Safety Precautions on page 4-3
for installation of blades.
UNIVERGE SV8100
2.3.3 Install
for complete details on
Installing the SV8100 Chassis