Issue 9.0
3 - 58
5.
Using tie wraps, secure CHS2U BATT CABLE INT in cable guide
bracket.
Figure 3-70 Secure Cable in Support Bracket
6.
With supplied screw, install cable guide in chassis.
7.
Install two 2.3 AH-12V batteries (locally procured) into the CHS2U BATT
MTG KIT (refer to
The first battery must be installed on the left side, then slid to the right due to an
installation tab on the mounting kit.
Figure 3-71 Installing Cable Support Guide
Figure 3-72 Installing Two Batteries on page
UNIVERGE SV8100
3-59).
Installing the SV8100 Chassis