Issue 9.0
2.2
2.3
7 - 2
The PGD Adapter connects to any available digital extension port. The
terminal connections made in the PGD Adapter and the jumper settings
determine what features are used for each circuit.
Channel 1
Status LED
LED Indications
Table 7-1 PGD Adapter LED Indications
LED
Indication
LED 1
Green LED when
CH1 in use.
LED 2
Green LED when
CH2 in use.
Setting up PGD Adapter Connections
If the PGD Adapter is to be wall mounted, all the cable connections should
be made first.
For the module to ID correctly after setting the jumpers, set the circuit type
to 0 for the module port in Program 10-03-01 prior to connecting the line
cord to the PGD Adapter.
Channel 2
Status LED
Figure 7-1 PGD Adapter
Flashing green LED indicates DIP Switch
setting and programming for CH1 are
conflicting.
Flashing green LED indicates DIP Switch
setting and programming for CH2 are
conflicting.
Installing SV8100 Optional Equipment
UNIVERGE SV8100
Note