Selecting A Location; Table 6-1 Bch Charging Leds - NEC Univerge SV8100 System Hardware Manual

Issue 9.0
2.2
6 - 2
When charging the BCH, the following LEDs provide indications of the status:
On-Hook Charging:
Off-Hook (Idle):
The BCH retains call histories for up to 10 outgoing and 10 incoming calls. For
outgoing calls, this includes completed and uncompleted calls. For incoming
calls, this includes both answered and unanswered calls. The call history
provides the date, time and telephone number for each call. When the limit is
exceeded, the oldest call is deleted and replaced with the newest call.

Selecting a Location

Before choosing a location for your new telephone, consider these important
guidelines:
If multiple cordless terminals are installed, keep their Bluetooth cradles at

least 3.3 feet (1 meter) apart.
If the Bluetooth cradle is installed near a metal, concrete wall or any other

structure that could affect radio transmission, a communication failure might
occur.
Keep the Bluetooth cradle at least 9.8 feet (3 meters) away from any device

listed below. Also be careful not to get within 9.8 feet (3 meters) of these
devices when using the Bluetooth handset.
Microwave ovens

Wireless LAN access points (AP)

Medical apparatus

RFID (apparatus operating in the 2.4GHz band)

Manufacturing equipment, such as plasma strippers (LSI manufacturing)

Speedway electronic toll gates

Bluetooth devices


Table 6-1 BCH Charging LEDs

Red = Charging
No LED = Idle
Installing SV8100 Cordless Telephones
UNIVERGE SV8100
Green = Charging Complete
Flashing Red = Incoming Call