Plp: Padlock In Connected/Test/Disconnected Positions; Klp: Key Lock For Connected/Test/Disconnected Positions; Klp Lock Additional Accessory - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions

PLP: padlock in connected/
test/disconnected positions
KLP: key lock for connected/
test/disconnected positions
KLP lock additional accessory This additional accessory limits the locking function to the disconnected position only.
86 | © 2014 ABB | 1SDH000999R0002 - L8569
The PLP lock locks the moving part of a withdrawable circuit-breaker in the fixed part, in one of the following
positions:
• connected
• test
• withdrawn
Only one type is available that allows you to mount up to three padlocks with a diameter of 8 mm.
NOTE: the PLP lock can also be supplied in the presence of a KLP lock
Information on the assembly is available from the web site http://www.abb.com/abblibrary/DownloadCenter/,
in particular with the kit sheet 1SDH000999R0707.
The KLP lock for connected/test/disconnected position locks the moving part of a withdrawable circuit-
breaker in the fixed part, in one of the following positions:
• connected
• test
• withdrawn
NOTE: it is possible to lock the moving part in the disconnected position only by using the
additional accessory KLP lock.
The KLP lock for connected/test/disconnected positions is available with two types of lock:
• lock with different key code numbers (for an individual circuit-breaker).
• lock with the same key code number (for more than one circuit-breaker). The maximum number of key
code numbers available is five.
Through an appropriate setup, the KLP lock for connected/test/disconnected positions can work with three
other types of lock:
• Ronis
• Profalux
• Kirk
• Castell
The maximum number of locks that can be installed per circuit-breaker is the two, for all types of lock.
NOTE: the supply of Ronis - Profalux - Kirk locks is at customer's expense.
NOTE: the KLP lock can also be supplied in the presence of a PLP lock
Information on assembly is available at the web site http://www.abb.com/abblibrary/DownloadCenter/, in
particular with the sheets kit:
• 1SDH000999R0704 for key locks with lock supplied by ABB;
• 1SDH000999R0705 for the key locks with pre-engineering for Ronis - Profalux - Kirk locks;
• 1SDH000999R0719 for the key locks with pre-engineering for Castell locks;
Information on the assembly is available from the web site http://www.abb.com/abblibrary/DownloadCenter/,
in particular with the kit sheet 1SDH000999R0727.
Mechanical accessories | 2 - Mechanical safety accessories
ABB | SACE Emax 2