List Of Alarms And Signals; Led View - ABB SACE Emax 2 Installation, Operation And Maintenance Instructions

Low voltage air circuit-breakers

Hide thumbs Also See for SACE Emax 2:

Table of Contents

ABB | SACE Emax 2

5 - List of alarms and signals

LED view The Ekip Dip release continuously monitors its own operating status and that of all the devices to which it is

connected. All the signals are available with the front LEDs.

The protection LEDs provide information with various combinations of lighting and flashing, while the Power

LED, as described on page 35, indicates the power status of the release.

Figure 68

NOTE: the number of leds present depends on the version of the release (LI, LSI, LSIG).

Ekip Dip protection release | 5 - List of alarms and signals

Table of Contents