Panasonic KX-TVS50 Installation Manual page 270

C5 CHECKING SYSTEM USAGE (SYSTEM REPORTS)
to specify the mailbox range 101 through 209, enter 101 in Step 5 and 209 in Step 6.
Note
While the System Administrator programs via a computer, a System Report will not be
generated. The System Report starts to be generated after the System Administrator
has completed programming and system prompt [>] is displayed on the computer.
Clearing the Reports
The Port Usage, Flash Memory Usage, Mailbox Usage, and Fax Call Reports can be cleared.
1.
Log in the Main Menu.
2.
Press [5] for the System Report Menu.
3.
Press [2] to clear the Flash Memory Usage Reports, [3] to clear the Port Usage Reports, [4]
to clear the Mailbox Usage Reports, or [8] to clear the Fax Call Report.
4.
Press [2] to clear the report. To clear the Mailbox Usage Reports, go to the Step 5.
5.
Type the mailbox number of the start of the range.
Note
If a [#] is entered in place of each digit of the mailbox numbers (e.g., # # # for 3-digit
mailbox numbers), reports for all mailboxes will be cleared and the System Report
Menu will appear. In this case, Step 6 can be skipped.
6.
Press [1] to specify the mailbox range, and Type the mailbox number of the end of the
range. Press [2] to clear all Mailbox Usage Reports.
270
SYSTEM MANAGER'S GUIDE