Panasonic KX-TVS50 Installation Manual page 212

B4 SYSTEM ADMINISTRATION - PORT SERVICE
Parameter
Incoming Call
Service
Incoming Call
Service Prompt
Prompt for
Rotary Callers
Delayed
Answer
Time
Available for the KX-TVS80 only.
*1
Port 1 - Night Mode
To select the Night Mode Features for port 1, follow the menu path as shown:
System Administration Top Menu - 1 - 3 - Port No. (1) - 2
Note
The port assignment procedure for Port 2 is the same as Port 1.
212
Value Range
(Default)
1. Voice Mail Specifies one of 4 incoming call services.
2. Auto. Attn.
3. Interview
Note 1: When you specify the Interview Service, one of
4. Custom
Subscriber's Interview mailbox numbers should also be
(Auto. Attn.)
specified.
Note 2: When you specify the Custom service, one of 100
(1-100) Custom service numbers should also be specified.
1. System Specifies the language of voice prompts to be played on
2. User 1 this port.
3. User 2
4. Selective
Note 1: This parameter is not valid if incoming call
(User 1)
service is set to "Interview" or "Custom".
Note 2: If "Selective" is specified, you will need to select
a prompt available for rotary callers. See "Prompt for
Rotary Callers" below.
1. System Specifies in which language rotary callers hear the voice
2. User 1 prompts when they cannot enter any digit to select a
3. User 2 "Prompt Selection Number" while Multilingual selection
(System) menu message is being played.
0-60 s Specifies whether the port answers immediately (0) or
(0) with delay (1 - 60 s).
Table 39
Description/Function
SYSTEM ADMINISTRATOR'S GUIDE