Panasonic KX-TVS50 Installation Manual page 224

B5 SYSTEM ADMINISTRATION - SERVICE SETTINGS
Parameter
Description
Call Transfer
Caller ID Call Routing - Delete
Permits specified Caller ID List numbers to be deleted from the list.
To access the proper menu for Caller ID Call Routing - Delete, follow the menu path
as shown:
System Administration Top Menu - 1 - 4 - 3 - 2 - Caller ID List No. (1-120)
Caller ID Call Routing - Listing
Displays all Caller ID List numbers.
To access the proper menu for Caller ID Call Routing - Listing, follow the menu path
as shown:
System Administration Top Menu - 1 - 4 - 3 -3
224
Value Range
(Default)
Up to 20 Enters a name and/or description of the Caller ID number.
characters Any ASCII character (except \) can be used.
(None)
Note: When nothing is registered in this parameter but the
caller's name is transmitted from the Central Office, the
name will be automatically registered in this parameter.
When this is done, an asterisk " " will appear with the
Call Transfer parameter if "PUTD" is enabled (see
7.2.19 DTMF Information Display (PUTD)). For
example, you might see this: "Custom 3 ". This
indicates the name was automatically registered in the
VPS.
Custom/Extn./ Specifies the destination to which the call from an
Mbx assigned Caller ID number is automatically forwarded.
(None) The "Custom" setting (enter"C") enables callers to be
forwarded to the specified Custom Service menu. The
"Extn." setting (enter "E") enables callers to be forwarded
to the specified extension. The "Mbx" setting (enter "M")
enables callers to leave messages in the specified
mailbox. A System Group Distribution List number can
be specified here instead of a mailbox number.
Table 46
Description/Function
SYSTEM ADMINISTRATOR'S GUIDE