Panasonic KX-TVS50 Installation Manual page 239

To select the External Message Delivery, follow the menu path as shown:
System Administration Top Menu - 1 - 5 - 7 - 4
Parameter
Retry Times
Busy Delay
No Answer
Delay
Outgoing Call
Ports
Message
Length
Max. Messages
for Mailboxes
System
External
Message
Delivery
Duration Time
Callback
Telephone No.
SYSTEM ADMINISTRATOR'S GUIDE
B6 SYSTEM ADMINISTRATION - SYSTEM PARAMETER SETTINGS
Value Range
(Default)
0-9 times Specifies the number of times that an external message
(3) delivery call should be attempted when the destination is
busy or if there is no answer.
1-60 min Specifies the length of time in minutes the VPS must wait
(3) after a busy condition is received before trying to deliver
the message again.
60-120 min Specifies the length of time in minutes the VPS is to wait
(60) after a no answer condition is received before trying to
deliver the message again.
Port No. Specifies the port numbers used for the External Message
(1, 2) Delivery feature.
1-6 min Specifies the allowable message length of external
(3) delivery messages that the Subscriber can record.
1-100 msgs Specifies the maximum number of external delivery
(3) messages that can be stored in 1 mailbox.
1-9 min Specifies the maximum telephone connect time allowable
(3) for an external message delivery call. Used to prevent
excessive telephone charges. Time begins when the
destination number answers the call. The VPS terminates
the call when the specified length of time has been
exceeded. However, the VPS does not terminate a call
until the whole message is played even though the
specified time expires.
Up to 32 digits This telephone number is announced to the recipient as the
telephone number to be called in order to retrieve the
sender's message. The VPS plays the callback telephone
number to recipients if unable to deliver the message
because of an incorrect password.
Table 57
Description/Function
239