Panasonic KX-TVS50 Installation Manual page 119

Description
Dial Number
Type of
Device
Use Mode
No. of Retries
Busy Delay
Time
No Answer
Delay Time
Time Frame 1,
2
MON - SUN
CUSTOMIZING THE SYSTEM
Value Range
(Default)
Up to 32 Digits of Assigns the telephone or beeper number to Device 1,
2 and/or 3.
[1-9,0, ,#,P,T,M,X]
(None)
P: Pause
T: Dial Tone Detection
M: Dial Mode Switching Code (DTMF to Pulse, or
Pulse to DTMF)
X: Callback Number Entry Code
1-9, 0, , #: Dial Codes
The callback number entry code (X) must be entered
if COS is set to enable and set to beeper.
Use backspace to delete your entry.
1. Telephone Assigns whether device is beeper or telephone.
2. Beeper
(Telephone)
Not Use: Does not use device.
1. Not Use
Continuously: The VPS notifies each time a message
2. Continuously
is recorded in the mailbox.
3. Scheduled
Scheduled: The VPS notifies the subscriber if a
(Continuously)
message is left during one of the time frames.
0-9 Times Specifies the number of times a device should be
retried when busy or no-answer.
(0)
0-120 min The time the VPS will wait before retry on busy.
(3)
60-120 min The time the VPS will wait before retry on No
Answer.
(60)
1-12: h Weekly Schedule for Message Waiting Notification.
00-59: min The schedule is only used when Use Device is set to
AM/PM: am/pm Scheduled.
: All Day
Space: No Use
Table 25
Description/Function
5.5 SETTING MAILBOXES
119