Panasonic KX-TVS50 Installation Manual page 101

8.
Activating the Quick Setup
Screen output:
Quick Setup - Setup
To set up the mailbox and restart, select "Yes."
To cancel and exit, select "No."
1: Yes
To activate the Quick Setup, Press [1]. The VPS begins to change system programming
data.
Screen output:
Quick-Setup
Setup 101
Selecting "No" in the above screen cancels all changes made to this point.
Then "PORT TEST." "SYSTEM SETUP..." and "1...2...3..." appear on the screen one by
one.
Screen output:
PORT TEST ...
SYSTEM SETUP ...
1 ... 2 ... 3 ...
Screen output when Quick Setup is finished:
**ON LINE MODE**
>
Press ENTER.
Screen output:
System Administration Top Menu
1 : Program
2 : System Reports
3 : Utility Command
4 : System Reset/Clear
5 : Quick Setup (VT100 Mode Only)
Enter the number : =
CUSTOMIZING THE SYSTEM
2: No
To set up the mailbox and restart, select "Yes."
To cancel and exit, select "No."
1: Yes 2: No
5.1 STARTING UP
101