Utility Commands; Off-Line Set (Ofln) - Panasonic KX-TVS50 Installation Manual

7.2 UTILITY COMMANDS

7.2 UTILITY COMMANDS
In the Utility Command Mode, the System Administrator can access the functions described
below by entering the appropriate command at the "$" prompt, and Pressing RETURN.
To select the Utility Commands Menu, follow the menu path as shown:
System Administration Top Menu - 3
Utility Command (Type 'HELP' for command list.)
$
OFLN:
ONLN:
PASS:
TIME:
PSET:
ELOG:
SAVE:
LOAD:
GPRN:
VERS:
CREP:
CCLR:
MWL:
MRL:
MPLT:
HELP:
QSET:
LMON:
PUTD:

7.2.1 Off-line Set (OFLN)

The OFLN utility command is used to turn off the VPS Call Progression Mode. Set the VPS to
Off-Line Mode before deleting a mailbox, since this operation involves the updating of a large
number of related parameters.
134
Sets the system to off-line mode
Sets the system to on-line mode
Sets the System Administrator's password
Sets the system clock, date, and time
Specifies the reports printing time
Displays device error log
Stores a backup of the program or data in the flash memory
Restores a backup of the program or data to the system
Displays all of the VPS parameters
Displays the version of the program
Displays the keypad assignments, message recording status and the
tree-structure of a Custom service
Clears a Custom service menu access count
Specifies the number of times the VPS attempts to turn on the message
waiting lamp on the extensions
Sets the minimum recording length of a message
Displays the user prompt recording status
Displays brief instructions and a list of Utility Commands
Set up your VPS roughly so that you can use it quickly
Line Monitor
Display DTMF Information
Table 26
SYSTEM MAINTENANCE AND TROUBLESHOOTING