Yamaha CL1 Reference Manual page 197

B
MIDI/GPI popup button
Press this button to open the MIDI/GPI popup window, in which you can make MIDI and GPI-
related settings.
C
DANTE SETUP button
Press this button to open the DANTE SETUP popup window. This window enables you to make
various audio network settings (console ID setting; SECONDARY PORT functionality setting;
audio bit rate; latency setting; selections for devices controlled via the I/O DEVICE screen).
■ BUS SETUP field
This field enables you to make bus-related settings.
D
BUS SETUP popup button
Press this button to open the BUS SETUP popup window, in which you can make MIX bus/
MATRIX bus-related settings.
■ DATE/TIME popup button
Press this button to open the DATE/TIME popup window, in which you can set the date and time.
■ NETWORK popup button
Press this button to open the NETWORK popup window, in which you can set the network address.
■ Indicator field
This field displays various information about the console's status.
E
BATTERY indicator
Indicates the status of the internal battery.
NOTE
The LOW or NO indication will appear if the battery runs down. In this case, immediately contact
your Yamaha dealer or a Yamaha service center listed at the end of the operating manual
(separate document) to have the backup battery replaced.
F
POWER SUPPLY indicator
Indicates the currently-running power supply: INT (internal) or EXT (PW800).
G
Version indicator
Indicates the version number of the main CPU, sub CPU, and DANTE module.
■ CONSOLE LOCK button
This button executes the Console Lock function. If the console password has been set, pressing this
button will open the AUTHORIZATION popup window. Enter the correct password to execute
Console Lock.
If the console password has not been set, pressing this button will execute the Console Lock
immediately.
■ CONTRAST/BRIGHTNESS field
This field enables you to set the LCD brightness and contrast.
H
BANK A/BANK B buttons
Select a bank to which you want to save the brightness and contrast settings. You can save two
different settings in bank A and B, and switch between them if desired.
I
CONTRAST NAME knob
Adjusts the contrast of the channel name display.
J
BRIGHTNESS NAME knob
Adjusts the brightness of the channel name display.
BRIGHTNESS CH COLOR knob
Adjusts the brightness balance of the channel color and the channel name display.
BRIGHTNESS SCREEN knob
Adjusts the brightness of the display.
BRIGHTNESS PANEL knob
Adjusts the brightness of the panel LEDs.
BRIGHTNESS LAMP knob
Adjusts the brightness of the lamp connected to the LAMP connector.
197
Other functions
Reference Manual