Talkback - Yamaha CL1 Reference Manual

3
INPUT TO TALKBACK field
• INPUT TO TALKBACK patch button
.......................... Press the button to open the PORT SELECT popup window, in
which you can patch a desired input port to an input port to
patch to talkback. The selected port name will appear on the
button.
• +48V indicator .......................... Indicates the on/off status of the +48V phantom power
supplied to the selected port.
• ANALOG GAIN knob ............. Sets the analog gain of the selected port. You can adjust the gain
by using the multifunction knobs.
• HA meter.................................... Displays the level of the HA input signal.
4
TALKBACK ASSIGN field
An indicator lights to indicate the currently-selected output destination of the talkback signal.
5
TALKBACK ON button
Switches talkback on or off.
2.
Press the TALKBACK popup display button or the ASSIGN field to open the
TALKBACK popup window.
In this popup window you can make detailed settings for talkback.
1 2
1
TALKBACK IN field
• +48V button
Switches on or off the phantom power (+48V) supplied to the TALKBACK jack.
• TALKBACK level meter
Indicates the input level of the mic connected to the TALKBACK jack.
2
INPUT TO TALKBACK field
This field allows a mic connected to a conventional input port to be used as a talkback input.
• INPUT TO TALKBACK patch button
Press the button to open the PORT SELECT popup window, in which you can patch a desired
input port to talkback. The selected port name will appear on the button.
• +48V button
This is an on/off switch for the phantom power (+48V) supplied to the selected input port.
• ANALOG GAIN knob
Adjusts the analog gain setting for the selected input port. Press this knob so that you will be able
to use the multifunction knob to adjust the gain.
• HA meter
Indicates the input level of a mic connected to the selected input port.
• GC ON button
Turns the Gain Compensation (gain correction function) on or off. The button will appear if the
input jack of the I/O device is patched.
• Gain Compensation meter
Indicates the level after Gain Compensation. It will appear if the input jack of the I/O device is
patched.
NOTE
These parameters and meters will not appear if no input port is selected.
3
TALKBACK ON button
Switches talkback on or off.
3
4
ASSIGN field
• Channel select buttons
Enable you to select a channel (bus) on which the talkback signal is sent.
• CLEAR ALL button
Press this button to clear all selections.
3.
Connect a mic to the TALKBACK jack on the front panel, and then rotate the
4
TALKBACK GAIN knob to adjust the input sensitivity of the mic signal.
The meter in the TALKBACK IN field indicates the input level of the mic connected to the
TALKBACK jack. If you want phantom power (+48V) to be supplied to the TALKBACK jack,
turn on the +48V button located in the TALKBACK IN field.
107
Talkback and Oscillator
Reference Manual