Yamaha CL1 Reference Manual page 182

4
RECORDER INPUT meters
Indicate the level of the signals input to the recorder.
5
PLAYBACK OUT popup buttons (L/R)
Press these buttons to open the CH SELECT popup window, in which you can select the signals
patched to the recorder's L/R output channels for playback.
6
PLAYBACK OUT GAIN knob
Sets the level of the recorder playback output signal.
7
PLAYBACK OUT CUE button
Press this button to audition the signal output from the recorder.
NOTE
You cannot turn on this button and the RECORDER INPUT CUE button simultaneously.
8
PLAYBACK OUT meters
Indicates the level of the recorder playback output signal.
3.
To assign channels to the recorder inputs, press the RECORDER INPUT popup
button L or R.
The CH SELECT popup window will appear.
1
1
Category list
Enables you to select the type of channels.
2
Channel select buttons
Select the channels that will be patched to the USB memory recorder's inputs.
• MIX 1–24....................MIX channels 1–24
• MTRX 1–8..................MATRIX channels 1–8
• ST L/R .........................STEREO channel L/R
• ST L+C ....................... STEREO channel L mixed with the MONO (C) channel
• ST R+C ....................... STEREO channel R mixed with the MONO (C) channel
• MONO........................ MONO channel
• CH1–72 ...................... Direct output of an INPUT channel 1–72
NOTE
In the case of the CL3/CL1, channels that do not exist on those models will not be shown.
4.
Use the category list and the channel select buttons to select the channel that you
want to patch to the USB memory recorder output.
If you select a channel to which a channel is already patched, a dialog box will ask you to confirm
the patch change. Press the OK button in the dialog box.
5.
When you have finished assigning the channel, press the CLOSE button.
You will return to the RECORDER screen.
6.
Assign a channel to the other input in the same way.
NOTE
The USB memory recorder always records and plays back in stereo. If you want to record in
monaural, with the same signal for left and right, you must assign both of the recorder inputs to
the same channel.
7.
To assign channels to the recorder playback outputs, press the PLAYBACK OUT
popup button L or R.
The CH SELECT popup window will appear.
2
1
1
Category List
Enables you to select the type of channels.
182
Recorder
2
Reference Manual