Program Authorisation Codes - Samsung OfficeServ 100 System Administration Manual

Samsung OfficeServ 100

PROGRAM AUTHORISATION CODES

[MMC 707]
You can add or change authorisation code entries. These codes are used to authorise calls made
by stations and can be forced or optional. Each code is associated with a class of service which is
activated when the code is entered. Up to 250 codes (each between 4 and 10 digits) are allowed.
Note: To set up stations to use forced authorisation codes, see
count and Authorisation Codes.
Open customer programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 707
Display shows
2. Dial the code index entry (e.g., 005)
OR
Press the VOLUME keys to select the entry number
and press the right soft key to move the cursor
3. Enter the authorisation code via the keypad (e.g. 1234)
and press the right soft key to move the cursor
4. Enter class of service no. 01–30 (e.g. 05)
OR
Press the VOLUME keys to select the COS number
5. Press the right soft key to return to step 2
OR
Press Transfer (or TRSF) to store and exit programming
OR
Press SPEAKER to store and advance to the next program
System Administration Guide
Program Stations for Forced Ac-
DISPLAY
AUTHOR CODE (001)
C:01
AUTHOR CODE (005)
_ C:01
AUTHOR CODE (005)
1234 C:01
AUTHOR CODE (005)
1234 C:05
29