Samsung OfficeServ 100 System Administration Manual page 25

Samsung OfficeServ 100
Refer to the section Program System Speed Dial Numbers
keys B–F you can use during this programming procedure.
Open customer programming and follow these instructions.
ACTION
1. Press Transfer (or TRSF) 105
Display shows
2. Dial the station number (e.g., 205) OR
press the VOLUME keys to select the station
and press the right soft key to move the
cursor
If the selected station has no speed dial
bins, this display will be shown and a
new station may be selected
3. Dial the speed dial number (e.g., 05) OR
press the VOLUME keys to select location and
press the right soft key to move the
cursor OR press the left soft key to return
to step 2
4. Enter the trunk access code (e.g., 9)
followed by the number to be dialled
(e.g., 4264100)
(If you make an error, press HOLD to
clear an entry or use the VOLUME DOWN key
to step back)
5. Press the F key to access
Speed Dial Names For Stations
step 4, below] to enter a name for this number
OR press left soft key to return to step 3
OR press right soft key to return to step 2
OR press Transfer (or TRSF) to save and exit
programming
OR press SPEAKER to save
and advance to the next program
Program Personal
[MMC106,
System Administration Guide
(above) for full details of the special
DISPLAY
[201] SPEED DIAL
00 :
[205] SPEED DIAL
00 :
[205] SPEED DIAL
SPDBLK NOT EXIST
[205] SPEED DIAL
05 : _
[205] SPEED DIAL
05 : 9-4264100_
21