Connecting The Mks-8075/Mks-8076 - Sony CCP-8000 System Setup Manual

2-8. CCP-8000 Panel Cabling

2-8-1. Connecting the MKS-8075/MKS-8076

Structure of MKS-8075
(Connecting the extension adaptor)
Adaptor case :
Screw (BV3 x 10) :
Connecting plate A :
Connecting plate B :
Connecting plate C :
Panel cover (L) :
Panel cover (R) :
Cable (D-sub 50-pin):
Structure of MKS-8076 (Memory card/USB adaptor)
Adaptor case :
Screw (BV3 x 10) :
Connecting plate A :
Connecting plate B :
Connecting plate C :
Panel cover (L) :
Panel cover (R) :
Fig. 1 : Example of connection method
Number of 2
connections
2-22
1
4
1
1
2
1
1
1
1
4
1
1
2
1
1
3 4
: The position where the MKS-8076 can be connected
How to Connect the MKS-8075 and the MKS-8076
m
. A maximum of eight extension adaptors can be connected by
using the horizontal connection and the vertical connection.
(The horizontal connection can be configured up to the
two horizontal connection line at the maximum.)
(For an example of connection, refer to Fig. 1.)
. There are three methods of vertical connection as
described below. (Refer to Fig. 2. (2-25 page))
Method A : Install the extension adaptors on the panel so
that they have differences in height like
flight of steps having the same outside
appearance as that of the main panel.
Method B : Install the extension adaptors flat on the
panel without any differences in height.
(In such a case as installed on tabletop)
Method C : Install the extension adaptors in the rack.
(Horizontal connection is also required.)
. When the extension adaptors are installed using both of
the horizontal and vertical connections, be sure to
perform the vertical connection first then perform the
horizontal connection.
. When the MKS-8076 is going to be installed, install it in
the top-most position. (Refer to Fig. 1.)
. When the vertical connection (A) is selected, be sure to
secure all of the side panels with screws. Never panel it
on table top. (The fixing method is same as that of the
main panel.)
5 6 7 8
MVS-8000 System
SYSTEM SETUP