Installation of CPU module
Connect the expansion adapter to the CPU module before mounting the PLC in the enclosure.
For the connection method of the expansion adapter, refer to Page 85 Connection method B - connection of an
expansion adapter.
1.
Push out all DIN rail mounting hooks (A in the following figure).
1
A
2.
Fit the upper edge of the DIN rail mounting groove (B in the following figure) onto the DIN rail.
B
3.
Lock the DIN rail mounting hooks (C in the following figure) while pressing the PLC against the DIN rail.
C
C
3
Installation of extension module
1.
Push out the DIN rail mounting hook (A in the right
figure) of the extension module.
2.
Fit the upper edge of the DIN rail mounting groove (B in
the right figure) onto the DIN rail.
3.
Push the product against the DIN rail.
4.
Lock the DIN rail mounting hook while pressing the
product against the DIN rail.
5.
Connect the extension cable. For the connecting procedure of the extension cable, refer to Page 84 Connection
Methods for CPU Module and Extension Devices.
5 INSTALLATION
78
5.3 Procedures for Installing on and Detaching from DIN Rail
1
1
3
1
A
Rear panel
A
B
3