Mitsubishi Electric MELSEC iQ-F FX5U User Manual page 176

Item
Max. load
Open circuit leakage current
Min. load
Response time OFFON
ONOFF
Voltage drop when ON
Output circuit configuration
■Transistor output (source output)
Item
No. of output points
Connection type
Output type
External power supply
Output circuit insulation
Indication of output operation
APPENDIX
174
Appendix 5 I/O Module
Specifications
FX5-EYT/ES, 0.5 A/point
FX5-32ET/S, The total load current of resistance loads per common terminal should be the following value.
FX5-16ET/ES-H • 4 output points/common terminal: 0.8 A or less
• 8 output points/common terminal: 1.6 A or less
FX5-CEYT/D, 0.1 A/point
FX5-C32ET/D The total load current of resistance loads per common terminal should be the following value.
• 8 output points/common terminal: 0.8 A or less
0.1 mA/30 V DC

FX5-EYT/ES, 0.2 ms or less/200 mA (at 24 V DC)
FX5-32ET/S
FX5-CEYT/D, 0.2 ms or less/100 mA (at 24 V DC)
FX5-C32ET/D
Y0, Y1, Y4, Y5: 2.5 s or less/10 mA (at 5 to 24 V DC)
FX5-16ET/ES-H
Y2, Y3, Y6, Y7: 0.2 ms or less/200 mA (at 24 V DC)
FX5-EYT/ES, 0.2 ms or less/200 mA (at 24 V DC)
FX5-32ET/S
FX5-CEYT/D, 0.2 ms or less/100 mA (at 24 V DC)
FX5-C32ET/D
Y0, Y1, Y4, Y5: 2.5 s or less/10 mA (at 5 to 24 V DC)
FX5-16ET/ES-H
Y2, Y3, Y6, Y7: 0.2 ms or less/200 mA (at 24 V DC)
1.5 V or less(Y0, Y1, Y4, and Y5 of FX5-16ET/ES-H is 1.0 V or less)
FX5-EYT/ES,
Load
FX5-32ET/S,
DC power
FX5-16ET/ES-H
supply
Fuse
DC power
supply
Fuse
FX5-CEYT/D,
Load
FX5-C32ET/D
DC power supply
Fuse
DC power supply
Fuse
Specifications
FX5-8EYT/ESS 8 points
FX5-16EYT/ESS 16 points
FX5-32ET/SS 16 points
FX5-16ET/ESS-H 8 points
FX5-C16EYT/DSS 16 points
FX5-C32EYT/DSS 32 points
FX5-C32ET/DSS 16 points
FX5-EYT/ESS, Terminal block (M3 screws)
FX5-32ET/SS,
FX5-16ET/ESS-H
FX5-CEYT/DSS, Connector
FX5-C32ET/DSS
Transistor/source output
5 to 30 V DC
Photo-coupler insulation
LED is lit when output is on
• With FX5-C32EYT/, the lower number/higher number order is switched with the DISP switch F/L.
• With FX5-C32ET/, the input/output is switched with the DISP switch IN/OUT.
Y
COM0
Y
COM1
Y
COM0
COM0
Y
COM1
COM1