Sanyo MCO-19M Service Manual page 73

17 ROM version
0 In Top Screen, press MENU key and select "Tools".
1 Press ENTER key to display "Select Tools (1/2)" and press MENU key to select "Svc".
2 Press ENTER key to display "Password" and ROM version is displayed.
3 Select "Cancel" in MENU key and press ENTER key.
4 "Select Tools (1/2)" is displayed.
Note) ROM version for Main PCB is displayed as "Main Board Ver. x. xxx".
ROM version for LCD PCB is displayed as "LCD Board Ver. x. xxx".
Procedures
- 70 -
MENU key
Tools
Svc
Cancel