Setup; Checking The Tire Pressure; Checking The Fluid Levels - Toro 31202 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Parts Catalog
Operator Training Material
1

Checking the Tire Pressure

No Parts Required
Procedure
The tires are over inflated for shipping. Therefore, release
some of the air to reduce the pressure. The correct air
pressure for non-cab models is 103 kPa (15 psi) in the front
tires and 172 kPa (25 psi) in the rear tires. If a cab is installed
on the machine, the front and rear tires should be inflated to
172 kPa (25 psi).
2

Checking the Fluid Levels

No Parts Required
Procedure
1. Check the hydraulic fluid level before starting the
engine, refer to Checking the Hydraulic System (page
43).
2. Check the engine oil level before starting the engine,
refer to Checking the Engine Oil Level (page
Description
No parts required
No parts required
19).
Qty.
–
–
Qty.
1 Read before operating the machine
1 Read before operating the machine
1 Use reference part numbers
1 View the video before operating the machine
3. Check the cooling system before starting the engine;
refer to Checking the Cooling System (page
12
Use
Check the tire pressure.
Check the hydraulic fluid, engine oil,
and coolant levels.
Use
38).