Product Overview; Controls - Toro 07264 Operator's Manual

Product Overview

1. Steering wheel
2. Gear shift selector

Controls

Accelerator Pedal
The accelerator pedal (Figure 14) gives the
operator the ability to vary ground speed of the
vehicle. Pressing the pedal starts the engine.
Pressing the pedal farther increases ground speed.
Releasing the pedal will slow the vehicle and the
engine will stop running. Maximum forward speed
is 14 mph (22 km/h).
Figure 14
1. Accelerator pedal
Figure 13
3. Parking brake
4. Fuel cap
2. Brake pedal
5. Cargo box
6. Towing tongue
Brake Pedal
The brake pedal is used to stop or slow the vehicle
(Figure 14).
Brakes can become worn or can be
misadjusted resulting in personal injury.
If brake pedal travels to within 1 inch
(25 mm) of the vehicle floor board, the
brakes must be adjusted or repaired.
Parking Brake
The parking brake is between the seats (Figure 15).
Whenever the engine is shut off, the parking brake
must be engaged to prevent accidental movement
of the vehicle. To engage the parking brake, pull
back on the lever. To disengage, push the lever
forward. If the vehicle is parked on a steep grade,
make sure that the parking brake is applied. Place
blocks at the downhill side of the wheels.
18
7. Cargo box release lever