Toro Mower Safety - Toro 03422 Operator's Manual

Be sure all drives are in neutral and parking brake is
engaged before starting engine. Only start engine from
the operator's position. Use seat belts if provided.
Slow down and use extra care on hillsides. Be sure to
travel in the recommended direction on hillsides. Turf
conditions can affect the machine's stability. Use
caution while operating near drop-offs.
Slow down and use caution when making turns and
when changing directions on slopes.
Never operate with guards not securely in place. Be
sure all interlocks are attached, adjusted properly, and
functioning property.
Do not change the engine governor setting or overspeed
the engine.
Stop on level ground, disengage drives, engage parking
brake (if provided), shut off engine before leaving the
operator's position for any reason including emptying
the grass baskets.
Stop equipment and inspect the machine after striking
objects or if an abnormal vibration occurs. Make
necessary repairs before resuming operations.
Keep hands and feet away from the cutting units.
Look behind and down before backing up to be sure of
a clear path.
Never carry passengers and keep pets and bystanders
away.
Slow down and use caution when making turns and
crossing roads and sidewalks. Stop reels if not mowing.
Do not operate the mower under the influence of
alcohol or drugs.
Use care when loading or unloading the machine into a
trailer or truck.
Use care when approaching blind corners, shrubs, trees,
or other objects that may obscure vision.
Maintenance and Storage
Disengage drives, raise the cutting units, set parking
brake, stop engine and remove key and disconnect spark
plug wire. Wait for all movement to stop before
adjusting, cleaning or repairing.
Clean grass and debris from cutting units, drives,
mufflers, and engine to help prevent fires. Clean up oil
or fuel spillage.
Let engine cool before storing and do not store near
flame.
Shut off fuel while storing or transporting. Do not store
fuel near flames or drain indoors.
Park machine on level ground. Never allow untrained
personnel to service machine.
Use jack stands to support components when required.
Carefully release pressure from components with stored
energy.
Disconnect battery and remove spark plug wire before
making any repairs. Disconnect the negative terminal
first and the positive last. Reconnect positive first and
negative last.
Use care when checking the reels. Wear gloves and use
caution when servicing them.
Keep hands and feet away from moving parts. If
possible, do not make adjustments with the engine
running.
Charge batteries in an open well ventilated area, away
from spark and flames. Unplug charger before
connecting or disconnecting from battery. Wear
protective clothing and use insulated tools.
Keep all parts in good working condition and all
hardware and hydraulic fittings tightened. Replace all
worn or damaged decals.

Toro Mower Safety

The following list contains safety information specific to
Toro products or other safety information that you must
know that is not included in the ANSI standards.
This product is capable of amputating hands and feet and
throwing objects. Always follow all safety instructions to
avoid serious injury or death.
Use of this product for purposes other than its intended use
could prove dangerous to user and bystanders.
Preparation
Always use the proper amount of rear ballast as
specified in this manual.
Always wear substantial shoes. Do not operate the
machine while wearing sandals, tennis shoes, or
sneakers.
Wearing safety shoes and long pants is advisable and
required by some local ordinances and insurance
regulations.
Only fill the fuel tank to within 1 inch of the top of the
tank, not the filler neck. Do not overfill.
Handle fuel carefully. Wipe up any spills.
4