Toro 03422TE Operator's Manual
  1. Manuals
  2. Brands
  3. Toro Manuals
  4. Lawn Mower
  5. 03422TE
  6. Operator's manual
Toro 03422TE Operator's Manual

Toro 03422TE Operator's Manual

Traction unit
Hide thumbs Also See for 03422TE:

Advertisement

Table of Contents

FORM NO. 3318-232 GB Rev B
OPERATOR'S
MODEL NO. 03422TE—70001 & UP
MANUAL
MODEL NO. 03427TE—70001 & UP
®
®
REELMASTER
2300-D/2600-D
Traction Unit
© The Toro Company—1997

Advertisement

Table of Contents
loading

Related Manuals for Toro 03422TE

Summary of Contents for Toro 03422TE

  • Page 1 FORM NO. 3318-232 GB Rev B OPERATOR’S MODEL NO. 03422TE—70001 & UP MANUAL MODEL NO. 03427TE—70001 & UP ® ® REELMASTER 2300-D/2600-D Traction Unit © The Toro Company—1997...

  • Page 2: Table Of Contents

    Use model and serial number in all correspondence and when ordering parts. To order replacement parts from an authorized TORO Distributor, supply the following information: Model and serial numbers of the machine.

  • Page 3: Safety

    Safety Training WARNING—Petrol is highly flammable. • Store fuel in containers specifically designed Read the instructions carefully. Be familiar with for this purpose. the controls and the proper use of the equipment. • Refuel outdoors only and do not smoke Never allow children or people unfamiliar with while refueling.
  • Page 4 Safety • machine speeds should be kept low on • before refueling; slopes and during tight turns; • before removing the grass catcher; • stay alert for bumps and hollows and other • before making height adjustments unless the hidden hazards; adjustment can be made from the operator’s •...
  • Page 5 Safety 10. When the machine is to be parked, stored or left unattended, lower the cutting means unless a pos- itive mechanical lock is used. Sound & Vibration Levels Sound Levels This unit has an equivalent continuous A-weighted sound pressure at the operator ear of: 84 dB(A), based on measurements of identical machines per 84/538/EEC.
  • Page 6 Symbol Glossary Caustic liquids, Poisonous Electrical shock, High pressure High pressure High pressure Crushing of Crushing of chemical burns to fumes or toxic electrocution fluid, injection spray, erosion of spray, erosion of fingers or hand, toes or foot, force fingers or hand gases, asphyxiation into body flesh...
  • Page 7 Safety Eye protection Head protection Hearing Caution, toxic First aid Flush with water Engine Transmission must be worn must be worn protection must risk be worn Fire, open light Hydraulic Brake system Coolant (water) Intake air Exhaust gas Pressure & smoking system prohibited Level...
  • Page 8 Safety Engine coolant Engine coolant f Engine Engine intake/ Engine intake/ Engine intake/ Engine start Engine stop pressure ilter lubricating oil combustion air combustion air air filter pressure pressure n/min Engine failure/ Engine rotational Choke Primer (start aid) Electrical preheat Transmission oil Transmission oil Transmission oil malfunction...

  • Page 9: Specifications

    Specifications Engine: Perkins, 4-cycle, 3-cylinder, liquid-cooled, teristics of the hydrostat. Parking or emergency brake vertical overhead valve, diesel engine with centrifugal is actuated by a ratchet hand lever on the operator’s water pump. 13.4 kW governed to a maximum speed left-hand side.

  • Page 10: Before Operating

    Before Operating IMPORTANT Check the oil level every 5 operating CAUTION hours or daily. Change the oil after every 50 hours of operation. Before servicing or making adjustments to the machine, stop the engine and remove the key Fill The Fuel Tank from the switch.

  • Page 11: Check The Cooling System

    Before Operating To prevent a fire hazard, wipe up any fuel that Carefully remove the cap from the radiator. may have spilled. Check the level of coolant in the radiator. The radiator should be filled to the top of the filler Check the Cooling System neck.
  • Page 12 Inspect the fuel filter and replace it if it is dirty. for 15–23 liters of hydraulic oil. Order Part No. 44- 2500 from your authorized Toro distributor. Install the bowl to the filter head. Make sure to position the O-ring correctly between the bowl Position the machine on a level surface.

  • Page 13: Check Tire Pressure

    Before Operating DANGER Because diesel fuel is flammable, use caution when storing or handling lt. • Do not smoke while filling the fuel tank. • Do not fill the fuel tank while the engine is running, hot, or when the machine is in an enclosed area.

  • Page 14: Controls

    Controls Traction and Stopping Pedal (Fig. 8, 9, & 10)—The traction pedal has three functions: one, to make the machine move forward; two, to move it backward; and three, to stop it. Using the heel and toe of your right foot, depress the top of the pedal to move forward and bottom of the pedal to move backward or to assist in stopping when moving forward.
  • Page 15 Controls engine coolant temperature gets too high. Figure 11 1. Deck engagement control Pull out—Two-wheel drive Push in—Three-wheel drive Reel Speed Control (Fig. 12)—For the desired reel speed, turn the reel speed control knob to the appro- priate setting for height-of-cut setting and mower speed.
  • Page 16 Controls Figure 15 1. Fuel shut off (on the fuel filter) Figure 13 1. Fore and aft lever 2. Weight adjustment lever 3. Inclining backrest Fuel Shut-off Valves, (Fig. 14 & 15)—Close the fuel shutoff valves under the fuel tank and on the fuel filter when storing the machine.

  • Page 17: Operating Instructions

    Operating Instructions Starting/Stopping The Engine be sure all parts operate correctly. Turn the steering wheel to the left and right to IMPORTANT: The fuel system may have to be check steering response. Then shut the engine off bled if any of the following situations have and check for oil leaks, loose parts and any other occurred: noticeable malfunctions.

  • Page 18: Operating

    Operating Open the fuel shut-off valve under the fuel tank and on the fuel filter. Open the (2) bleed screws on the side of the fuel filter mounting head, allowing the bowl to re-fill with fuel. Close bleed screws when the bowl is filled.
  • Page 19 IDLE, and set the parking brake. In case of emergency, the Reelmaster 2300-D can be Selecting Clip Rate (Reel Speed) towed for a short distance. However, Toro does not recommend this as a standard procedure. To achieve a consistent, high-quality cut and a uni-...
  • Page 20 Watch carefully for, and avoid, holes in the terrain, sud- Before mowing with the Reelmaster, The Toro Company den drop-off s and other hidden hazards. To prevent suggests you find a clear area and practice starting and...
  • Page 21 Operating Make sure the radiator screen, radiator and the oil cooler(diesel models) and cooling fins and area around the engine cooling air intake (gasoline models) are kept free of dirt or grass clippings. After cleaning, it is recommended – the machine be inspected for possible hydraulic fluid leaks, damage or wear to the hydraulic and mechanical components –...

  • Page 22: Maintenance

    Maintenance Minimum Recommended Maintenance Intervals Inspect the air filter, dust Every Every Every 50 Every 100 cap and burp valve 400 hours 200 hours hours hours Lube all grease fittings Change engine oil Check engine belt tension Change the engine oil filter Check the traction belt’s tension Service the air filter Replace the fuel filter...
  • Page 23 Quick Reference Aid 1. Engine oil level 2. Engine oil drain (17mm socket) 3. Hydraulic oil level—Center of sight glass 4. Belts (Fan/water pump, hydraulic pump) 5. Coolant level fill 6. Fuel—Diesel only 7. Grease points 8. Radiator screen 9. Air cleaner 10.
  • Page 24 Maintenance Figure 21 Figure 24 Figure 22 Figure 25 Figure 23 Figure 26...

  • Page 25: Servicing The Air Cleaner

    Maintenance CAUTION Before servicing or making adjustments to the machine, stop the engine and remove the key from the switch. Hood Removal The hood may be easily removed to ease maintenance in the engine area. Unlatch and raise the hood. Remove the cotter pin securing the hood pivot to the mounting brackets.

  • Page 26: Changing The Engine Oil And Filter

    Fill the reservoir to the correct level. Use a genuine Toro oil filter for replacement. The hydraulic fluid must be changed every 500 hours of Place all controls in the neutral or disengaged operation or yearly, whichever comes first.
  • Page 27 NOTE: Do not order by reference number if a parts catalog is being used; use the part number. Figure 31 1. Reel speed knob To order replacement parts from an Authorized TORO 2. Backlap knob Service Dealer, supply the following information: Make initial reel to bedknife adjustments appro- priate for backlapping on all cutting units Start Model and serial numbers of the mower.
  • Page 28 15° and 20° Slope Chart Align this edge with a vertical surface such as a tree, building, pole, etc.

This manual is also suitable for:

Reelmaster 2300-d03427teReelmaster 2600-d

Table of Contents