Installing The Hood Latch (Ce Only); Installing The Exhaust Guard (Ce Only) - Toro 03206 Operator's Manual

5
Installing the Hood Latch (CE
Only)
Parts needed for this procedure:
1 Hood lock bracket
1 Screw, 1/4 x 1–1/2 inches
1 Flat washer, 1/4 inch
1
Locknut, 1/4 inch
Procedure
1. Unhook the hood latch from the hood latch bracket
(Figure 7).
1. Hood latch
2. Hood latch bracket
2. Slide the hood lock bracket onto the latch (Figure 7).
3. Hook the latch onto the hood latch bracket
(Figure 7).
4. Insert a bolt (1/4 x 1-1/2 inches) through the hood
lock bracket and secure it with a flat washer and
locknut (Figure 7).
Figure 7
3. Hood lock bracket
6
Installing the Exhaust Guard
(CE Only)
Parts needed for this procedure:
1 Exhaust guard
4 Self-tapping screw
Procedure
1. Position the exhaust guard around the muffler while
aligning the mounting holes with the holes in the
frame (Figure 8).
1. Exhaust guard
2. Secure the exhaust guard to the frame with 4
self-tapping screws (Figure 8).
16
Figure 8