Table of Contents
Advertisement
Glow Plug Indicator
The glow plug indicator light (Figure 29) will glow when
the glow plugs are operating.
Parking Brake
Whenever the engine is shut off, engage the parking
brake (Figure 29) to prevent accidental movement of the
machine. To engage the parking brake, pull up on the
lever. The engine will stop if you press the traction pedal
with the parking brake engaged.
Lift Lever Lock
Move the lift lever lock (Figure 29) rearward to prevent
the cutting units from dropping.
Reel Speed Control
The reel speed control is located under the console
cover (Figure 30). To obtain the desired clip rate
(reel speed), rotate the reel speed control knob to the
appropriate height-of-cut setting and mower speed.
Refer to Selecting the Clip Rate.
Figure 30
1. Reel speed control
Backlap Control
The backlap control is located under the console cover
(Figure 30). Rotate the knob to R for backlapping and to
F for mowing. Do not change the knob position while
the reels are rotating.
2. Backlap control
Fuel Gauge
The fuel gauge (Figure 31) registers the amount of fuel
in the tank.
1. Fore and aft lever
Fore and Aft Seat Adjustments
Move the lever (Figure 31) on the side of the seat
outward, slide the seat to the desired position, and
release the lever to lock the seat into position.
24
Figure 31
2. Fuel gauge
Advertisement
Table of Contents
