Huawei AP3010DN-AGN Hardware Installation And Maintenance Manual page 60

Huawei AP3x10xN&5x10xN&5x30xN&6x10xN&7x10xN
Hardware Installation and Maintenance Guide
Figure 5-24 Cutting off surplus cables
Step 8 Put the connector body onto the wire holder and turn the metal shell by 90°, as shown in
5-25.
Figure 5-25 Put the connector body onto the wire holder
Step 9 Push the metal shell towards the connector body until the wire holder and the connector body
are engaged completely. Crimp the connector, as shown in
Figure 5-26 Crimping the connector
Issue 11 (2015-05-18)
NOTE
Ensure that the wire holder is in good contact with the connector body.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-26.
5 Appendix
Figure
53