Fujitsu PRIMERGY BX600 User Manual page 56

Settings
Initial configuration via serial connection to client
Ê Open a HyperTerminal session from the client to the master management
blade. Use the following settings:
Bits per second
Data bits
Parity
Stop bit
Flow control
Terminal type
Once you have opened the HyperTerminal session the welcome screen of
the console menu will be displayed (see figure below).
Ê Log in as root. The initial password reads root.
! Change the root password as soon as possible (see
02-BX600-57). Failure to do so may result in unauthorized access
and loss of customer data.
When you have logged on, the main menu of the console menu will be
displayed.
02 BX600 56
– –
115200
8
1
1
None
VT100
March 2006
Installation and initial operation
page
U41057-J21-Z146-1-76