Fujitsu PRIMERGY BX600 User Manual page 52

Settings
6 Failure indicator (amber LED)
Dark:
Lights amber:
Blinks amber
(2 sec.):
7 Master indicator (green LED)
Unlit:
Lights green:
Blinks green:
The following table shows the conditions of the management blades indicated
by the interaction of master indicator and failure indicator LEDs.
Management blade condition
One management blade is installed
and alive
Two management blades are installed ON (Master)
One management blade is installed
and hang up
Two management blades are installed
and both hang up
If the default settings of the
restored.
02 BX600 52
– –
This management blade is OK (see table below).
If only one management blade is present: this blade has failed
(see table below).
Management blade is running in power up mode (generating
heart beat for master/slave selection).
This management blade is a slave (standby), backup of the
master management blade (see table below).
This management blade is the master, responsible for the entire
system management (see table below).
This management blade is in special mode
Master indicator
(green LED)
ON
OFF (Slave)
ON
ON
management blade
March 2006
Installation and initial operation
Failure indicator
(amber LED)
OFF
OFF
ON
ON
are destroyed, they can be
U41057-J21-Z146-1-76