Sound - Angelcare ac1300 Owner's Manual

TO STOP THE ALARM
On the Parent Unit, press any key
to stop the alarm.
TO ADJUST THE SENSOR PAD SENSITIVITY LEVEL:
1
2
ON
3
20 sec
TO ACTIVATE THE TIC FUNCTION:
Allows you to hear a TIC sound when Sensor Pad function is activated.
1
2
3
IMPORTANT
• The Sensor Pad is not designed for use with adults, children or infants older than 24 months.
• Once you are finished using the Sensor Pad, deactivate the movement function and please
remove it from the baby's crib and store it away.

5.2 - SOUND

TO ACTIVATE SOUND:
1
2
3
TO TEST THE SOUND:
Ask someone to speak into
the Nursery Unit or place the
4
unit near a radio to ensure that
sound is being picked up.
IMPORTANT
To avoid feedback (whistling), keep both units
at least 3 meters apart.
OR
4
5
4
1) Press Menu/Select button to access main menu.
2) Select the Sound icon.
3) Use the up and down arrows to activate or
4) Press Menu/Select button to confirm.
Press the Pager/Hold
button on the Nursery Unit.
1) Press Menu/Select button to access
main menu.
2) Select the Settings icon to access sub-menu.
3) Select the Movement Sensitivity icon.
4) Use the up and down arrows to choose
the desired sensitivity level (1 to 5).
5) Press Menu/Select button to confirm.
NOTE: If you are receiving false alarms,
adjust the sensitivity level.
1) Press Menu/Select button to access
the main menu.
2) Select the TIC icon.
3) Use the up and down arrows to activate
or deactivate the TIC function.
4) Press Menu/Select button to confirm.
Regular TIC sound will emit from Parent Unit.
deactivate the sound.
IF YOU HEAR NO SOUND:
• Ensure both units are ON.
• Check the sound has not been turned down
on the Parent Unit.
• Increase volume on the Parent Unit.
• Check on the top bar of the Parent Unit to
see if the monitor is on "MUTE" instead of
"ON".
• If there is no power to any unit, check or
recharge batteries. Check both are working.
Change electrical outlet if required.
• Bring Parent Unit closer to Nursery Unit.
11