Advertisement
Table of Contents
- 1 Important Safety Instructions
- 2 Setup Requirements
- 3 What's in the Box
- 4 What You Need
- 5 Setting up the Parent Unit
- 6 Setting up the Nursery Unit
- 7 Turning on Your Monitor
- 8 Parent Unit
- 9 Getting to Know Your Monitor
- 10 Parent Unit Screen Icons
- 11 Alert Notifications
- 12 Troubleshooting
- 13 Technical Specifications
- 14 To Learn more
- Download this manual
Model AC127
Baby Movement Monitor,
with Sound
WARNING
Keep user's guide for future reference. Please read the warnings and
safety instructions carefully before assembling & using the product.
Failure to follow the warnings and the instructions could result in serious
injury or death or damage to the product.
IMPORTANT - INTENDED USE
This product is NOT intended and should NOT be used to prevent Sudden Infant Death Syndrome (SIDS).
This product is NOT intended to diagnose, treat, mitigate, cure or prevent any disease or condition.
This is a product to monitor the movement of healthy babies and is not a substitute for parental care.
OWNER'S MANUAL
Advertisement
Table of Contents
Related Manuals for Angelcare AC127
Summary of Contents for Angelcare AC127
- Page 1 OWNER’S MANUAL Model AC127 Baby Movement Monitor, with Sound WARNING Keep user’s guide for future reference. Please read the warnings and safety instructions carefully before assembling & using the product. Failure to follow the warnings and the instructions could result in serious injury or death or damage to the product.
- Page 2 • Sources of vibration & movement other than your baby’s can be detected by the Sensor Pad and interfere with the performance of your Angelcare monitor • The alarm will not sound if it detects movement other than your baby’s •...
-
Page 3: Important Safety Instructions
(partial Sensor Pad uses a replaceable Button Cell or full), hollow frame construction mattresses and Lithium Battery. Only use the Angelcare water beds. Please consult Angelcare if unsure of recommended replacement battery (see mattress compatibility Technical Specification) 39. -
Page 4: Setup Requirements
• Use ONLY the stand sold with the product DO NOT immerse in water any part of the monitor. • Be sure replacement parts are supplied by Angelcare Clean only with dry cloth and have the same characteristics as original part. -
Page 5: Setting Up The Parent Unit
2. Replace the battery cover, align 2 dots and click to secure 3. Remove the mattress from the cot, place Sensor Pad - Angelcare® logo side up - on base in approximate centre of mattress. It should be centred on the hardboard... -
Page 6: Setting Up The Nursery Unit
• The Sensor Pad functions with standard cot sprung and foam mattresses and not memory foam (partial or full), hollow frame construction mattresses and water beds. Please consult Angelcare if unsure of mattress compatibility. The hardboard maintains a constant pressure on the Sensor Pad, enabling it to detect the baby’s movements even when the baby... - Page 7 TEST THE SENSOR PAD 1. Sources of vibration & movement other than your baby’s can be detected by the Sensor Pad and interfere with the performance of your Angelcare monitor. The alarm will not sound if it detects movement other than your baby’s 2.
-
Page 8: Getting To Know Your Monitor
IMPORTANT • Test your monitor before first use • Prior to use and on a regular basis (before placing your child in the cot) always check the Sensor Pad is detecting no movements or vibrations in its environment • Test your monitor every time you move the Sensor Pad to a different place 5- GETTING TO KNOW YOUR MONITOR NURSERY UNIT Power indicator... -
Page 9: Parent Unit Screen Icons
PARENT UNIT SCREEN ICONS Temperature display Temperature alerts Detection mode indicators Visual sound indicator Reception quality indicator Parent Unit battery level indicator VOX mode indicator Celsius or Fahrenheit display MONITOR’S FUNCTIONS Note: • The settings are accessed by pressing and holding the MENU button the Parent Unit •... -
Page 10: Alert Notifications
IMPORTANT • All changes and adjustments made in the main menu will not be saved EXIT unless you confirm them by pressing the EXIT button • When in MENU mode, sound transmission between Parent and Nursery Units will be temporarily deactivated Parent Unit battery level indicators: Sensor Pad movement detection is activated Full... -
Page 11: Troubleshooting
NURSERY UNIT Power On/Off & Low Battery Light Indicator Steady green: Monitor is activated Flashing green: Nursery unit is using the back-up batteries Flashing yellow: Nursery Unit batteries are low Movement Sensor Pad & Temperature Indicator Flashing red: No movement is detected •... - Page 12 4. Turn the Parent Unit ON. The Out-of-range icon will blink (indicates Nursery Unit is in linking mode) 5. Press and hold the Talk Back button on the Parent Unit until a beep tone is heard 6. Press OK button on the Parent Unit. The Out-of-Range icon should blink faster to indicate that the Parent Unit is in linking mode •...
- Page 13 NURSERY UNIT POWER ON INDICATOR (GREEN LIGHT) DOES NOT LIGHT UP • Check connections or change to another electrical outlet. • Press the Nursery Unit ON/OFF button for 2 seconds to turn the Nursery Unit ON. WEAK RECEPTION • Bring units closer together. •...
- Page 14 Please do not return Angelcare® will bear the cost of repairing or replacing this product to the store. If you have questions the product and shipping it back to you.
-
Page 15: Technical Specifications
RF Channel no. between Nursery Unit and Sensor Pad: 79 2 AAA rechargeable batteries and 100-240 V AC / 5V DC Hereby, Angelcare Monitors Inc., declares that this Baby 0.6A Adapters for the Parent Unit. Monitor is in compliance with Directive 2014/53/EU. The... -
Page 16: To Learn More
Contact information IMPORTANT! This Angelcare® monitor is a personal care product. Please do not return this product to the store. If you have questions or need help, please call your distributor before returning this product. We, at Angelcare®, stand behind all of our products. If you are not completely satisfied or have any questions, please contact your distributor before returning this product: United States and Canada: Please contact us at: info@angelcarebaby.com...