Angelcare AC1100 Owner's Manual
  1. Manuals
  2. Brands
  3. Angelcare Manuals
  4. Baby Monitor
  5. AC1100
  6. Owner's manual

Angelcare AC1100 Owner's Manual

Digital video, movement & sound baby monitor
Hide thumbs Also See for AC1100:

Advertisement

Table of Contents

See also: Instruction Manual , Manual
OWNER'S MANUAL
DIGITAL VIDEO, MOVEMENT
& SOUND BABY MONITOR
Model AC1100
IMPORTANT ADVICE FOR INITIAL SETUP
Movement Alarm
Your monitor comes with the movement alarm activated.
When switching on your monitor it will alarm, with or without
the Sensor Pad plugged in, if no movement is detected.
Deactivate the movement function to use the monitor without
the Sensor Pad.
Batteries
Insert the enclosed rechargeable batteries into the Parent
Unit. If inserted incorrectly the Parent Unit will not charge
when placed in the charging cradle. The battery icon will flash
briefly on the Parent Unit screen to indicate charging.
Cord Safety
Ensure the Nursery Unit is at least 1 metre away from your
baby's cot. The Sensor Pad cord must always be kept out of
reach of baby and secured using the cord cover kit provided.
PLEASE FOLLOW THE INSTRUCTIONS CAREFULLY FOR CORRECT SETUP
Please DO NOT return this product to the store. For assistance please
contact our helpline on 0845 009 1789 or email helpline@babyhelpline.co.uk
Mon – Fri 10am – 4pm, excluding bank holidays.
FOR YOUR PEACE OF MIND

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AC1100 and is the answer not in the manual?

Questions and answers

Related Manuals for Angelcare AC1100

Summary of Contents for Angelcare AC1100

  • Page 1 FOR YOUR PEACE OF MIND OWNER’S MANUAL DIGITAL VIDEO, MOVEMENT & SOUND BABY MONITOR Model AC1100 IMPORTANT ADVICE FOR INITIAL SETUP Movement Alarm Your monitor comes with the movement alarm activated. When switching on your monitor it will alarm, with or without the Sensor Pad plugged in, if no movement is detected.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS WARNINGS WARNINGS .................. 3 AC1100 SETUP REQUIREMENTS ..........8 STEP 1 - Charging the Parent Unit ..........9 1. THIS PRODUC T CANNOT REPL ACE 8. Keep monitor AWAY from heat sources RESPONSIBLE ADULT SUPERVISION. This (such as stoves, radiators, etc.).

  • Page 3: Warnings

    batteries away from children. attention to cords and plugs, convenience kind on the product. been placed under the mattress properly. receptacle, and the point where they exit from the product. 15. IMPORTANT SAFETY INSTRUCTIONS 15.18 Antenna - The antenna used for this Be sure the Sensor Pad is on a flat, firm transmitter must be installed to provide surface with the printed side facing up.
  • Page 4 16. IMPORTANT SAFETY INSTRUCTIONS WARNING RELATED TO USE OF BATTERIES (North America Only) 16.1 Use O N LY the t ype and size of 16.9 DO NOT attempt to recharge batteries batteries specified in the owner’s manual. provided with or identified for use with 17.1 Modifications not authorized by the 17.4 This device complies with the part 15 There is a risk of explosion if batteries are...

  • Page 5: Step 1 - Charging The Parent Unit

    2) Remove the battery door and insert the Rechargeable Batteries (included). 3) Connect the AC Adapter to the Charging Cradle and into an electrical outlet. 1 Sensor Pad (AC1100) or 2 Sensor Pads (AC1100-2SP) 2 AC Adapters 3 Rechargeable with pre-installed cord covers AAA Batteries 4) Charge the unit for 15 continuous hours (prior to first use).

  • Page 6: Step 2 - Installing The Sensor Pad

    STEP 2 - INSTALLING THE SENSOR PAD 2.2 - SELECT THE CRIB LEG YOU WILL BE USING TO SECURE THE CORD COVERS Cord covers 1, 2, 3, 4: Position on floor RECOMMENDED 1) Use the crib leg by the wall closest to Cord cover 4: the Nursery Unit (fig 1).

  • Page 7: Step 3 - Setting Up The Nursery Unit

    STEP 3 - SETTING UP THE NURSERY UNIT 8 cm 1) Remove the battery door and insert 3 AAA Alkaline Batteries (not included). 2) Place the Nursery Unit at a minimum 6) Place the 6 cord cover approximately of 1 m away from the crib. 8 cm from the edge of the mattress 3) Connect the AC Adapter to the Nursery support.

  • Page 8: Step 4 - Turning On Your Monitor

    STEP 4 - TURNING ON YOUR MONITOR STEP 5 - TESTING AND GETTING TO KNOW YOUR MONITOR The Angelcare monitor can be used with the pre-program factory settings or you can ® 1) Press the Parent Unit ON/OFF button also customise your settings to your preference. for 2 seconds until blue screen appears.

  • Page 9: Sound Settings

    5.2 - SOUND TO STOP THE ALARM 1) Press Menu icon to access main menu. TO ACTIVATE SOUND: 2) Press sound icon to activate Press the Nursery or deactivate sound. Unit’s Main button Press the Parent Unit Motion Alarm icon Hold down left ‘wing’...

  • Page 10: Step 6 - Activating And Deactivating Additional Functions

    STEP 6 - ACTIVATING AND DEACTIVATING ADDITIONAL FUNCTIONS YOU ARE NOW READY IMPORTANT All changes and TO USE YOUR MONITOR adjustments made When in the menu or sub-menu in the main menu and modes, sound transmission between sub-menus will not be Parent and Nursery Units will be activated unless you temporarily deactivated.
  • Page 11 6.2 - ALARM 6.4 - THERMOMETER TO CHANGE THE MEASUREMENT UNIT: Allows you to select your preferred alarm mode for the Parent Unit. 1) Press the Menu icon to access 1) Press the Menu icon to access main menu. main menu. 2) Press the settings icon 2) Press the temperature icon to access to access sub-menu.
  • Page 12 6.5 - VIDEO 6.7 - INFRARED NIGHT VISION Allows you to turn video function ON or OFF. Allows you to capture image when lighting is unsufficient. 1) Press the Menu icon to access TO ACTIVATE NIGHT VISION: main menu. Press the Night Vision icon to chose available modes: 2) Press the Video icon to activate or deactivate the video function.

  • Page 13: Troubleshooting

    TROUBLESHOOTING 6.10 - zOOM MODE TAKING CARE OF YOUR RECHARGEABLE BATTERIES Allows you to zoom in to twice the normal view. • Ensure that you fully charge your batteries for 10 hrs before their first use. 1) Press the zoom icon. • To maintain maximum battery life it is recommended that you fully discharge your batteries periodically.

  • Page 14: Limited Warranty

    ® rechargeable video, movement and sound monitor (model AC1100) is free from any material and • Rotate Parent Unit or move it away from source of interference. workmanship defects, for a period of one (1) year from the date of the original purchase.

  • Page 15: Technical Specifications

    Unit and Nursery Unit is made on the Three AAA rechargeable batteries and 2.4GHz frequency. 7.5V DC adapter for Charging Base for the Hereby, Angelcare Monitors Inc, declares Parent Unit. this baby monitor is in compliance with the essential requirements and other relevant Caution: To reduce the risk of electric provisions of Directive 1999/5/EC.
  • Page 17 This Angelcare Baby Monitor is a Personal Care Product. Please DO NOT return this to the store, but contact us initially for advice and assistance: Angelcare Helpline on 0845 009 1789 Website: www.angelcare.co.uk Email: helpline@babyhelpline.co.uk NOTE: Helpline is open Monday to Friday, 10am to 4pm, excluding bank holidays.

Table of Contents

Save PDF