Re-Connection Procedure; Limited Warranty - Angelcare ac1300 Owner's Manual

LOSS OF CONNECTIVITY
In the case of loss connectivity, the first step is to bring the Parent Unit and the Nursery Unit closer
together and make sure that both units are ON to restore the connection.
If there is still no connection and no out of range warning after the above has been done, then and only
then should the re-connection procedure below be done.
2 3
6
NOTE:
By doing the re-connection procedure you will
reset the monitoring system back to original presets.

LIMITED WARRANTY

Angelcare ® warrants to the original owner of this
product that Angelcare
monitor (model AC1300) is free from any material
and workmanship defects, for a period of one (1)
year from the date of the original purchase. If this
monitoring system fails to function properly when
used as directed under normal conditions within
the one year period, Angelcare
replace the product, at our discretion, free of charge.
Please contact your distributor.
The product must be accompanied by a proof
of purchase, either a bill of sale or other proof
that the monitoring system is within the warranty
period. Angelcare ®
replacing the product and shipping it back to you.
This warranty does not apply to a product which
has been damaged as a result of improper
maintenance, an accident, improper voltage supply
or any other form of misuse. The warranty is also
void if the owner repairs or modifies the product in
any way. Angelcare
or consequential damages with regard to this
product. The warranty also excludes any liability
other than what is stated above. No other warranty
is given.
18
4 5
7
video, movement and sound
®
® will either repair or
will bear the cost of repairing or
is not liable for any incidental
®

Re-Connection procedure:

1) Turn the Nursery Unit & Parent Unit OFF
2) Turn the Nursery Unit ON
3) Quickly press & release the power button 4
times, the Nightlight on the Nursery Unit will
begin to flash
Please Note: The nightlight will flash for
approx 10 seconds – you will need to complete
the remaining steps whilst the nightlight is
flashing. Once this flashing stops, if you have
not completed all the steps you will need to
begin again
4) Turn the Parent Unit ON
5) You will see the blue Angelcare logo on the
screen followed by a blank screen – now press
& hold the Zoom Button on the Parent Unit.
6) Whilst still holding down the Zoom Button
quickly press & release the Power Button on
the Parent Unit
Please Note: Do not press the power button
for too long as this will switch the Parent Unit
OFF and you will need to begin again
7) Now release the Zoom Button
If successful you will see the video capture
appear on the Parent Unit screen as the Parent
Unit & Nursery Unit are now connected.
This warranty does not cover products and
accessories which are not Angelcare-branded, or
any problems that result from usage that is not in
accordance with product instructions, failure to
follow the product instructions, or problems caused
by using accessories, parts or components not
supplied by Angelcare.
LEGAL RIGHTS VARY FROM COUNTRY TO
COUNTRY. SOME COUNTRIES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATIONS MAY NOT APPLY TO YOU.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY
OUTCOME RESULTING FROM THE USE OF THIS
PRODUCT.
IMPORTANT! This Angelcare
care product. Please do not return this product
to the store. If you have questions or need help,
please call your distributor before returning this
product.
® monitor is a personal