Yamaha 40 Installation Manual page 20

È
É
10. Install: (For models with steering friction)
• Fuel hose 1
• Clamp 2
• Stay 3
• Bolt with washer 4
WARNING
Fit the fuel hose in the clamp securely.
11. Install: (For models with steering friction)
• Screw 1
• Collar 2
• Bolt with washer 3
• Clamp 4
• Wiring harness 5
• Battery cable 6
NOTE:
Set the battery cable 6 under the wiring har-
ness 5, shift cable a and throttle cable b.
12. Install:
È For models with steering friction
• Plastic tie 1
NOTE:
Fasten the wiring harness to the shift cable
and throttle cable.
É For models without steering friction
• Plastic tie 1
NOTE:
Fasten the battery cable and wiring harness to
the shift cable and throttle cable.
11
E