User Management; Registering The Id; To Register The Id Card Along With The Fi Ngerprint - Samsung SSA-R2010 User Manual

User Management

REGISTERING THE ID

1. Check if the green and orange indicators are all turned off when the reader turns on.
2. Present the master card to the reader. You will hear the following
voice message with the green and orange indicators blinking.
3. Present a user card to the reader. (You will hear a beep once when
the card is read) if you want to register the card alone, do not register
the fi ngerprint yet and just wait after a voice message of "PUT YOUR
FINGER".
•
You will hear a voice message of "ID Registered" with a beep three
times before registration of the card ID is completed .
4. Repeat step 3 above if you want to register another user.
5. When the user registration is completed, present the master card to exit the registration mode.
TO REGISTER THE ID CARD ALONG WITH THE FINGERPRINT
1. Check if the green and orange indicators are all turned off when the reader turns on.
2. Present the master card to the reader. You will hear the following
voice message with the green and orange indicators blinking.
3. Present a user card to the reader. Upon the voice message of "PUT
YOUR FINGER", Place the fi ngerprint on the scanner.
4. Upon the voice message of "REMOVED FINGER", release the
fi ngerprint from the scanner; present the fi ngerprint on the scanner
again when hearing "PUT YOUR FINGER AGAIN".
5. The user registration is completed when you hear the corresponding
message with a beep twice.
6. Repeat steps 3 through 5 above if you want to register another user.
7. When the user registration is completed, present the master card to exit
the registration mode.
24_
user management
REGISTRATION AND
Q
DELETION MODE, SCAN
YOUR CARD
Q
PUT YOUR FINGER
Q
ID REGISTERED
REGISTRATION AND
Q
DELETION MODE, SCAN
YOUR CARD
Q
PUT YOUR FINGER
Q
REMOVED FINGER
Q
PUT YOUR FINGER AGAIN
Q
FINGERPRINT REGISTERED