Samsung OfficeServ 7100 Installation Manual page 94

OfficeServ 7100
TECHNICAL MANUAL
7.2.7 SYSTEM DATA/ACTIVITY REPORTS
The following type of reports can be output to a PC or LAN printer that is connected to the
same network as the MP10/MP10a: SMDR (Station Message Detail Records), UCD Reports,
Traffic Reports, Alarm Reports and much more.
and data output network configuration
MMC can also configure the reports to be sent to PCs running 3
Reporting Packages, etc.).
MP10/MP10a
MP10/MP10a
7.2.8 OS 7100 and ANALOG TERMINAL ADAPTERS (ATAs)
The OfficeServ 7100 can be SIP enabled (SIP licenses required) to interface with other 3
analog terminal adapters (ATA) devices, to provide voice connectivity to a VoIP network. The
SIP enabled adapters can be used to support specialized voice applications such as:
• VoIP connectivity to remote analog stations.
• VoIP connectivity to remote Fax Machines.
• 911 routing to remote SIP-PSTN Gateway.
These 3 party analog terminal adapters (ATA) are not available through Samsung, and must
rd
be purchase separately.
of the manual.
Refer to MMC 829
(See OfficeServ 7100 Programming Manual).
OfficeServ 7100
Figure 7.27 Connecting SMDR
OfficeServ 7100
Figure 7.28 Connecting to Printer
For more details, please refer to the special application section 2.11
7.30
Home Page
PART 7 MAY 2010
to configure the report type
party applications (i.e. SMDR
rd
LAN
SMDR
LAN
Printer
Table of Contents
INSTALLATION
This
party
rd