Adding Cards To The System; Adding Stations And Trunks - Samsung OfficeServ 7100 Installation Manual

OfficeServ 7100
TECHNICAL MANUAL
PART 10. ADDING CARDS TO THE SYSTEM

10.1 ADDING STATIONS AND TRUNKS

1) Power the OfficeServ 7100 OFF before adding a new card. Locate a suitable empty card
slot. Having located a suitable slot, insert the new card into the slot and push firmly in the
middle of the card to ensure that it is fully inserted into the back plane connector.
2) After the new cards are inserted, the system must be told to recognize the new cards. This
is done through the use of MMC 806 Card Pre-Install. Use this MMC for each new card that
is installed.
3) The new cards must be assigned directory numbers according to the system numbering
plan in MMC 724. The technician must know the software port assignments of the new
cards so the ports can be assigned correct numbers.
10.1
Home Page Table of Contents
INSTALLATION
PART 10 MAY 2010